The Advantages of Trickle Vents: Fitted Ventilation for Windows

Installed as part of the window unit, drip ventilators can supply your house with continuous, unobtrusive and protected background ventilation.

The importance of background ventilation

In the last few years, a drive to offer thermal comfort and boost energy performance has actually seen residential residences progressing sealed than ever before.

However as houses are made more airtight, internal pollutants can have a higher impact on indoor air quality. If these contaminants can not get away, the health of those living in a house might be at risk.

Effective background ventilation is required to offer a healthy and comfy internal environment for the residents of a house.

What are Trickle ventilators?

Trickle ventilators (or trickle vents) offer this effective background ventilation for a house, contributing to a healthy living environment by enabling inconspicuous and controllable whole-room ventilation.

They are situated at the top of windows and can be easily adjusted through the use of cables, rods or simply by hand.

The benefits of installing trickle ventilators:

  • Cleaner air for your home
  • Attending to efficient background ventilation in your home may help to minimise the seriousness of illness such as those brought on by respiratory ailments like asthma. It can likewise assist to manage background air levels of contaminants such as carbon monoxide gas and carbon dioxide in your house.

Security

Drip ventilators allow continuous ventilation while a windows is closed and/or locked, and their setup footprint does not make it possible for invasion into a property.

24-hour operation

Even in the evening and while you are away on holiday, trickle ventilators can still operate to supply background ventilation to your house.

Noise reduction

Drip ventilators supply ventilation without the requirement to open windows, reducing noise levels as a consequence. In noisier locations, such as near a hectic roadway or an airport, acoustic choices are also offered.

Condensation reduction

Some houses may have an existing issue with condensation, especially in colder weather. Fitting windows with suitable trickle ventilation may improve the condensation problem, and could potentially decrease ensuing mould growth and internal surface damage.

Cost effective

Drip ventilators represent the most affordable expense route for provision of background ventilation without the need for air bricks and sustain no continuous electricity costs.

Are trickle ventilators obligatory?

When changing a window, installing a drip ventilator is not compulsory unless the existing window has one. If it does, the brand-new trickle ventilator needs to offer at least the exact same performance as the existing vent.

However even if the existing window does not have a drip ventilator, it is advised to consider installing one when changing it.

Trickle vent designs

Drip ventilators can be fitted with all window framing products including PVC-u, lumber, steel and aluminium.

Through frame design

A through frame drip vent style is frequently placed through the top of the frame. The drip vent is integrated into the frame itself.

Over frame style

An over the frame design is used when it is not possible to fit the drip vent through the frame. The drip vent makes provision for the ventilation to be routed over the frame or head of the window.

Glazed in

The drip vent is fitted into the glazed location along the top of the sealed glass.

Post Sponsored by Enfield Glass 24/7 – Here For All Your Double Glazing Repairs.

Repair and Restoration of Your Windows 

We all know that if a window or its glass are damaged then to restore the integrity of the structure we need to repair it as soon as we can.

Glaziers are committed to helping our customers, both private and industrial to get the best energy performance from their windows and doors. However, having entirely new energy effective windows and doors can be very pricey so there is more interest than ever in repairing old windows to save both cost and energy.

Significant heat loss

The older windows and doors are the more heat they can let get away and the less energy efficient they become. In summer season they let in the heat and in the winter season they let it out. To check how energy effective your windows are you can begin by examining air infiltration or leakage. If your windows do not fit flush to the frames then they will not be energy effective.

Repairing Air Leaks

You can correct air leakages quite cheaply with making use of some weather condition removing and some caulk. The weather stripping will be applied around the window and the caulk will fill any spaces. This solution should spend for itself within a year.

Block it out

Dressing your windows with blinds, shutters, shades and heavy-duty drapes will also enable you to keep heat loss around windows to a minimum.

Window Film

The use of window films is another simple to apply option for decreasing energy loss and will also protect the curtains and soft providing in your rooms from the fading that UV rays from sunlight causes. They will normally be made from polyester or plastic to be used by the homeowner or by a professional, if you prefer. Reflective window films include a metal oxide finishing that will obstruct sunshine and are extremely effective at conserving energy within your home.

Window repair

Older windows that are draughty, that droop or are stiff to open and close will usually be the victim of bad upkeep instead of bad workmanship. Older windows will often be made from wood and will last for hundreds of years if they re appropriately maintained every decade or so. Ask us how this can be done.

Glass repair work

Depending what the underlying reason for your window issues are you will be much better to call on the services of a glass repair specialist, specifically if your windows are old or are in a listed building.

Post Sponsored by Liverpool Glazing – Your Local Merseyside Glaziers.

Tips Before You Choose A Double Glazing Installer

Need to purchase replacement glass and glazing products for your home? Here are some suggestions on how to get the window, door, mirror and conservatory services you need, along with all the advantages of using a GGF Member Company.

1. Discover if local GGF Members

2. Match companies to your needs

Inspect the glazing companies you are getting in touch with really supply the services and products you require.

3. Look for multiple quotes

Request for a price quote from each of the companies you have actually called.

4. Validate GGF Membership

Verify the business is a current GGF Member– ask for their Certificate of Membership.

5. Read the agreement

Make sure you have actually read the contract completely and are aware of all conditions.

6. Guarantees/warranties

Ask the business about any assurances and service warranties for the products and/or services to be offered.

7. Make informed decisions

Consider what you want in regards to design and style, and likewise the age, type and area of your house.

8. Verify cancellation terms

Check the cancellation terms being provided. Ask the company you select about the cancellation/cooling-off period and the date from when this starts.

Most business do not offer a cancellation duration for made-to-measure windows, nevertheless GGF Member business offer a 7-day cancellation period for made-to-measure work from the date you sign the agreement.

9. Enquire about additional work needed

Ask if any extra work or processes might have to be undertaken as a result of the work you are preparing.

Post Sponsored by Essex Glaziers 24/7 – Here For All Your Window Replacement Needs.

Trickle Vents: Ventilation for Windows

Set up as part of the window system, drip ventilators can supply consistent, inconspicuous and safe background ventilation for a house.

The value of background ventilation

Recently, a drive to offer thermal comfort and boost energy efficiency has seen property homes progressing sealed than ever before.

Nevertheless as homes are made more airtight, internal toxins can have a greater effect on indoor air quality. If these toxins can not get away, the health of those residing in a house may be at threat.

Efficient background ventilation is necessary to offer a healthy and comfortable internal environment for the residents of a home.

Drip ventilators

Trickle ventilators (or drip vents) offer this effective background ventilation for a house, contributing to a healthy living environment by allowing unobtrusive and manageable whole-room ventilation.

They are located at the top of windows and can be quickly adjusted through the use of cords, rods or simply by hand.

The benefits of setting up trickle ventilators:

Cleaner air for your house

Attending to effective background ventilation in your house may assist to reduce the seriousness of health problems such as those brought on by breathing ailments like asthma. It can likewise assist to handle background air levels of pollutants such as carbon monoxide and co2 in your house.

Security

Trickle ventilators permit continuous ventilation while a windows is closed and/or locked, and their setup footprint does not make it possible for invasion into a home.

24-hour operation

Even at night and while you are away on holiday, drip ventilators can still run to supply background ventilation to your home.

Sound decrease

Trickle ventilators offer ventilation without the requirement to open windows, lowering noise levels as a consequence. In noisier locations, such as near a busy roadway or an airport, acoustic options are also offered.

Condensation reduction

Some homes might have an existing problem with condensation, specifically in chillier weather. Fitting windows with appropriate trickle ventilation may improve the condensation issue, and could potentially minimize consequent mould growth and internal surface area damage.

Cost effective

Trickle ventilators represent the most affordable expense path for arrangement of background ventilation without the requirement for air bricks and sustain no continuous electrical energy expenses.

Are drip ventilators mandatory?

When replacing a window, setting up a trickle ventilator is not mandatory unless the existing window has one. If it does, the brand-new trickle ventilator should offer a minimum of the exact same efficiency as the existing vent.

Nevertheless even if the existing window doesn’t have a trickle ventilator, it is advised to think about installing one when replacing it.

Drip vent styles

Drip ventilators can be fitted with all window framing materials consisting of uPVC, timber, steel and aluminium.

A through frame trickle vent design is frequently positioned through the top of the frame. The drip vent is integrated into the frame itself.

Over frame style

An over the frame design is utilised when it is not possible to fit the trickle vent through the frame. The trickle vent makes provision for the ventilation to be routed over the frame or head of the window.

Post Sponsored by Liverpool Glazing – Your Local Merseyside Glaziers

Condensation and the Causes of Condensation

Learn about condensation, why it happens and which of its causes you can control to reduce its probability of occurring in your home.

What is condensation?

Condensation in a household setting is when air-borne water vapour condenses into a liquid and is transferred on interior (or outside) surfaces.

If the temperature of a things (e.g. lawn, metal, the glass of a window pane) falls listed below what is known as the dew point temperature level for a provided relative humidity of the surrounding air, water vapour from the environment condenses into water droplets on its surface area.

This humidity differs according to the amount of water in the atmosphere and air temperature (called relative humidity). In damp conditions condensation takes place at greater temperatures. In cold conditions condensation happens despite relatively low humidity.

With regard to windows and doors, it is the distinction in temperature level in between the environment, be it internal or external, and the glass, that causes condensation to form.

Why does it happen in homes?

The air surrounding us in our homes constantly contains water vapour, which is invisible. A typical example is the steam cloud from a kettle, which rapidly becomes invisible – it has in truth been absorbed into the atmosphere.

The warmer the air, the more water vapour it can hold, however there is a limit to the amount it can hold for a given temperature. When that limitation is reached, the air is said to be ‘filled’.

When saturated air enters contact with a surface area that is at a lower temperature than itself, the air is chilled at the point of contact and sheds its surplus water vapour on that surface area, at first in the form of a mist and, if excessive, ultimately in the form of droplets of moisture.

An example of this is when a person breathes onto a mirror: condensation occurs because the exhaled air is saturated and its temperature level is higher than that of the mirror (which is at room temperature).

The factors governing condensation:-

1. Water vapour

This is produced by normal living activities such as cleaning, cooking, bathing, and so on, and can be managed by the use of extractor fans, cowlings, and ventilation at suitable places.

2. Inside temperature

This can be managed to some extent by changing single glazing with energy effective double or triple glazing, therefore maintaining a greater surface area temperature of the glass on the space side.

This will assist to keep the space’s air temperature, which, along with sufficient ventilation, will allow the room to hold more water vapour without condensing.

3. Outside temperature level

This can not be managed, but its impact on the inside room temperature level can be decreased by the installation of energy efficient double or triple glazing.

4. Internal and external temperature variation

This can not be controlled as the primary version is the outside temperature level. However, this variation might also be impacted by developing orientation, localised atmospheric conditions, shelter from close-by trees or buildings, air currents, wind speeds and close-by vegetation.

Some things to keep in mind:

  • It is typically the case that external condensation will appear on some windows but not on others due to variable microclimates in varying locations.
  • Condensation may take place on the outside of a window or door when the surface area temperature of the external pane is listed below the dew point. This can be the outcome of the reduction in the transfer of heat from within to out and is visible proof of the energy performance of the window or door.
  • Following the setup of replacement windows and doors, it is essential that appropriate ventilation is included to eliminate the airborne vapour. Failure to do this might result in this vapour condensing on the coldest surface which would no longer be the window but could be an outside wall.

Post Sponsored by Newham Glass 24/7 – Your Local Glazier.